Racking & Shelving Systems
Rack cable management covers a range of products used to manage and organise network cables within a server rack cabinet. Why do you need cable management? 19-inch rack accessories prevent cables from being unplugged or pulled out of servers protecting the integrity of a network. Cables can be a trip hazard. Organising your cables enables you to easily and quickly make changes to rack servers, maintain existing or new hardware. No need to unplug anything or navigate through tangled cables. An important part of cable management is to label all cabling and cable equipment. Typical Solutions. Cable organiser. A cable organiser, sometimes referred to as a cable manager, cable carrier or cable tidy can be horizontal or vertical. They help to bundle and route cables. This provides easy access to the cables and you can easily identify cables within the bundle. Many cable tidies feature rings that cables can be fed through, helping you to keep cabling neat. The rings can be made from plastic, metal or Velcro. Cable managers offer extra support to cables, preventing strain and enhancing the lifespan of network cables. Cable Tray. Cables can be rested on cable trays and routed around the server cabinet. These rarely have a ring or loop like cable managers, but often have gaps or vents that help to prevent overheating. Cable Entry Panel. Cable entry panel also called a cable entry seal or brush strip seal is an additional way of protecting your network hardware. Cables run through a panel opening preventing dust and dirt from entering the data cabinet with the cable. They contain a brush that removes contaminants, preventing them from entering the server cabinet. Some have an internal latch that cannot be opened without a key. If you use a cable entry seal, the integrity of a sealed cabinet is not compromised. Cable Management Arm. Cable management arms can be attached to racking within a server cabinet providing enough cable slack to pull running equipment out of a 19-inch rack without unplugging or removing cables. Cable management arms remove stress on cables, enhancing their lifespan, normally hinged or bent to offer flexibility with different racking. Some are compatible with square hole racks or round hole racks, some models are suitable for both types.
-
Bosch Rexroth Aluminium Cover Strip, 10mm groove size, 2m length
VND0.00 -
Bosch Rexroth, Black PVC Cover Strip, 10mm groove size, 1m length
VND1,135,309.12Lot (1 Lot of 20) -
Bosch Rexroth, Black PVC Cover Strip, 8mm groove size, 1m length
VND1,384,125.60Bag (1 Bag of 20) -
Cable Management Panel for use with 19-Inch Rack
VND1,551,410.08 -
CAMDENBOSS Additional Profile, 24mm Depth, 9U
VND0.00 -
CAMDENBOSS Additional Profile, 24mm Depth, 9U
VND792,299.20 -
CAMDENBOSS Black Cantilever Shelf 2U, 280mm x 446mm
VND0.00 -
CAMDENBOSS Black Cantilever Shelf 2U, 280mm x 446mm
VND2,390,710.08 -
CAMDENBOSS Black Cantilever Shelf 2U, 400mm x 446mm
VND3,013,230.88 -
Carbon Steel Cable Shunting Ring for use with TS IT Cabinet
VND0.00 -
Carbon Steel Cable Shunting Ring for use with TS IT Cabinet
VND3,058,888.80Pack (1 Pack of 10) -
Controlec Blue PS Laboratory Tray
VND0.00 -
Bosch Rexroth Aluminium Cover Strip, 10mm groove size, 2m length
VND5,097,188.80Pack (1 Pack of 10) -
INSTRUMET 19IN,FRONT PANEL,482.6X132.5X3
VND0.00 -
INSTRUMET 19IN,FRONT PANEL,482.6X132.5X3
VND1,164,852.48 -
Metal Cable Organizer with Metal Ring for use with Cable Management
VND1,602,439.52 -
METCASE Mounting Kit for use with Unicase Enclosures M6 x , 12 Pack
VND0.00 -
METCASE Mounting Kit for use with Unicase Enclosures M6 x , 12 Pack
VND142,728.96 -
METCASE Mounting Kit for use with Unicase Enclosures M6 x , 4 Pack
VND208,146.40 -
METCASE, 4U 19-Inch Rack Mount Case Combimet Ventilated, 173.6 x 482.6 x 365mm
VND0.00 -
METCASE, 4U 19-Inch Rack Mount Case Combimet Ventilated, 173.6 x 482.6 x 365mm
VND8,039,055.20