Fluke 1587 FC, Insulation Tester, 1000V, 2GΩ, CAT III 1000V
- Số cổ phiếu RS:
- 9055920
- Buôn. Số:
- FLUKE-1587 FC
- Nhãn hiệu:
- Fluke

Pháp luật và Tuân thủ
RoHS Status: Not Applicable
Tuyên bố sự phù hợp
Tuyên bố này xác nhận rằng sản phẩm chi tiết dưới đây tuân thủ các thông số kỹ thuật hiện được công bố trên phương tiện RS và phải tuân theo các điều kiện chất lượng nghiêm ngặt được áp đặt bởi các hệ thống quản lý nội bộ của RS Components. Hơn nữa và khi áp dụng, nó xác nhận rằng tất cả các thiết bị bán dẫn có liên quan đã được xử lý và đóng gói trong các điều kiện đáp ứng các yêu cầu hành chính và kỹ thuật của các tiêu chuẩn kiểm soát tĩnh điện ANSI / ESD S20.20 và EN61340-5-1.
| Số cổ phiếu RS | 9055920 |
| Mô tả Sản phẩm | Fluke 1587 FC, Insulation Tester, 1000V, 2GΩ, CAT III 1000V |
| Nhà sản xuất / Thương hiệu | Fluke |
| Số nhà sản xuất | FLUKE-1587 FC |
Các thông tin nêu trên liên quan đến sản phẩm được bán vào hoặc sau ngày hiển thị bên dưới.
THÀNH PHẦN RS
| Ngày | Jun 26, 2026 |
Thành phần RS Pte Ltd Robinson Road, PO Box 1582, Singapore 903132
Nước xuất xứ: US
Thông tin chi tiết sản phẩm
Fluke 1587 FC Insulation Multimeter
The Fluke 1587 FC Insulation Multimeter is the single tool that allows users to perform advanced insulation testing for preventive and PdM tasks. Combining a digital insulation tester with a full-featured, true-rms digital multimeter into a compact, hand-held unit, the 1587 model provides maximum versatility for both troubleshooting and preventative maintenance.
This model is supplied with a remote probe, test leads and alligator clips.
In addition the Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions through the Fluke Connect® Measurements app:
SUPPLIED_WITH : Insulation Multimeter, Remote probe, Test leads, A
• PI/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated insulation problems faster
• Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
• Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
• Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect® Assets
Features and Benefits
• True RMS Digital Multimeter for measuring Voltage and Current
• Auto and Manual ranging
• Selectable filter for accurate measurement of voltage and frequency on motor drives
• User selectable insulation test voltage for many applications
• Remote probe for easy and safe measurement
• Live circuit protection to prevents insulation test if voltage is >30V
Additional Specifications
• VFD low-pass filter for accurate motor drive measurements
• Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
• Insulation test: 0.01 MΩ to 2.0 GΩ
• Auto-discharge of capacitive voltage
• Insulation test smoothing reading
• Frequency
• Capacitance
• Diode test
• Temperature
• Min/Max
• AC/DC Voltage
• DC Millivolts
• AC/DC Milliamps
• Resistance (0.1 Ω to 50 MΩ)
• Continuity
• K-type thermocouple
• Rugged, utility hard case
• Auto power off
Thông số kỹ thuật
| Thuộc tính | Giá trị |
| Nhãn hiệu | Fluke |
| Power Source | Battery |
| Width | 100 mm |
| Length | 203 mm |
| Maximum Insulation Resistance Measurement | 2 GΩ |
| Minimum Test Voltage | 50 V |
| Dimensions | 203 x 100 x 50 mm |
| Minimum Operating Temperature | -20 °C |
| Height | 50 mm |
| Test Current | 1 mA |
| Model Number p | 1587 FC |
| Display Type | Backlit LCD |
| Maximum Operating Temperature | +55 °C |
| Battery Life | 1000 h |
| Weight | 550 g |
| Safety Category Level | CAT III, CAT IV |
| Maximum Test Voltage | 1000 V |
| Tester Type | Insulation Tester |
| Safety Category Voltage | 600 V, 1000 V |
| Battery Type | AA, NEDA 15A |
| Safety Category | CAT III 1000 V, CAT IV 600 V |