TE Connectivity, SOLISTRAND Uninsulated Crimp Ring Terminal, M2.5 Stud Size, 0.26mm² to 1.65mm² Wire Size, Grey
- Số cổ phiếu RS:
- 0373140
- Buôn. Số:
- 34104
- Nhãn hiệu:
- TE Connectivity

Pháp luật và Tuân thủ
Giấy chứng nhận tuân thủ RoHS
Chỉ thị của EU 2011/65 / EU và 2015/863 hạn chế sử dụng 10 chất dưới đây trong sản xuất các loại thiết bị điện được chỉ định.
Mặc dù hạn chế này không áp dụng một cách hợp pháp đối với các thành phần, nhưng người ta nhận ra rằng việc tuân thủ thành phần của LINE có liên quan đến nhiều khách hàng.
Định nghĩa RS về Tuân thủ RoHS:
- Sản phẩm không chứa bất kỳ chất bị hạn chế nào ở nồng độ và ứng dụng bị cấm theo Chỉ thị,
- và đối với các thành phần, sản phẩm có khả năng hoạt động ở nhiệt độ cao hơn theo yêu cầu hàn không chì chì
Các chất bị hạn chế và nồng độ tối đa được phép trong vật liệu đồng nhất là, theo trọng lượng:
| Vật chất | Sự tập trung |
| Chì | 0.1% |
| thủy ngân | 0.1% |
| PBB (Biphenyls đa bội) | 0.1% |
| PBDE (Ethen Diphenyl đa bội) | 0.1% |
| Crom hóa trị sáu | 0.1% |
| Cadmium | 0.01% |
| DEHP (Bis (2-Ethylhexl) phthalate) | 0.1% |
| BBP (Benzyl butyl phthalate) | 0.1% |
| DBP (Dibutyl phthalate) | 0.1% |
| DIBP (Diisobutyl phthalate) | 0.1% |
Nhà cung cấp mặt hàng được liệt kê dưới đây đã thông báo cho các Thành phần RS rằng sản phẩm là "Tuân thủ RoHS".
Các thành phần RS đã thực hiện tất cả các bước hợp lý để xác nhận tuyên bố này. Thông tin chỉ liên quan đến các sản phẩm được bán vào hoặc sau ngày chứng nhận này.
| Số cổ phiếu RS | 0373140 |
| Mô tả Sản phẩm | TE Connectivity, SOLISTRAND Uninsulated Crimp Ring Terminal, M2.5 Stud Size, 0.26mm² to 1.65mm² Wire Size, Grey |
| Nhà sản xuất / Thương hiệu | TE Connectivity |
| Số nhà sản xuất | 34104 |
RS Linh kiện Ltd, Đường Birchington, Corby, Northants, NN17 9RS, Vương quốc Anh
Tuyên bố sự phù hợp
Tuyên bố này xác nhận rằng sản phẩm chi tiết dưới đây tuân thủ các thông số kỹ thuật hiện được công bố trên phương tiện RS và phải tuân theo các điều kiện chất lượng nghiêm ngặt được áp đặt bởi các hệ thống quản lý nội bộ của RS Components. Hơn nữa và khi áp dụng, nó xác nhận rằng tất cả các thiết bị bán dẫn có liên quan đã được xử lý và đóng gói trong các điều kiện đáp ứng các yêu cầu hành chính và kỹ thuật của các tiêu chuẩn kiểm soát tĩnh điện ANSI / ESD S20.20 và EN61340-5-1.
| Số cổ phiếu RS | 0373140 |
| Mô tả Sản phẩm | TE Connectivity, SOLISTRAND Uninsulated Crimp Ring Terminal, M2.5 Stud Size, 0.26mm² to 1.65mm² Wire Size, Grey |
| Nhà sản xuất / Thương hiệu | TE Connectivity |
| Số nhà sản xuất | 34104 |
Các thông tin nêu trên liên quan đến sản phẩm được bán vào hoặc sau ngày hiển thị bên dưới.
THÀNH PHẦN RS
| Ngày | Jun 16, 2026 |
Thành phần RS Pte Ltd Robinson Road, PO Box 1582, Singapore 903132
Thông tin chi tiết sản phẩm
TE Connectivity SOLISTRAND Terminals and Splices
TE Connectivity SOLISTRAND Ring Terminals
SOLISTRAND ring crimp terminals designed to terminate solid and stranded wire and irregular shaped conductors. The robust design of these SOLISTRAND ring terminals enables them to maintain their superior performance characteristics even when used in the most challenging of environments. This design also enables these SOLISTRAND ring terminals to offer a long service. These SOLISTRAND ring terminals are made from fine grade high conductivity copper for optimal electrical performance and are electro tin plated for improved corrosion resistance. The closed barrel has brazed seams for an increased metal strength around the barrel offering resistance to harsh industrial environments. The inner surface of the barrel is serrated for maximum tensile strength and to maximise the electrical contact area after crimping. The resulting ’W’ crimp also allows a more cost effective shorter barrel to be used. The bell shaped barrel entrance of these SOLISTRAND ring terminals makes the insertion of wires easier and reduces installation time. For the optimum combination of mechanical strength and electrical conductivity these SOLISTRAND ring terminals are applied to the conductor using associated SOLISTRAND crimping tools which can be purchased separately.
Features and Benefits
Constructed of fine grade high conductivity copper for optimal electrical performance
Electro tin plating for improved resistance to corrosion
Robust design ideal for use in harsh environments
Brazed seams for increased barrel strength
Dimpled and serrated barrel for increased electrical performance and tensile strength
Bell shaped mouth on barrel for quick and easy wire insertion
170°C maximum rated for suitability in all standard applications
Applications
These SOLISTRAND crimp ring terminals are suitable for use in a wide range of applications including the following: materials handling equipment, motors, heavy equipment, pad and pole mount transformers, switchgear, telecommunications, appliances, panel boxes, power supplies and instruments and control.
Thông số kỹ thuật
| Thuộc tính | Giá trị |
| Nhãn hiệu | TE Connectivity |
| Series | SOLISTRAND |
| Insulation | Uninsulated |
| Maximum Wire Size mm² | 1.65 mm² |
| Minimum Wire Size mm² | 0.26 mm² |
| Colour | Grey |
| Minimum Wire Size AWG | 22 AWG |
| Maximum Wire Size AWG | 16 AWG |
| Inner Ring Diameter | 3.2 mm |
| Stud Size | M2.5 |
| Contact Plating | Tin |
| Thickness | 1 mm |
| Contact Material | Copper |
| Overall Length | 11.4 mm |