RS PRO IDM73 Handheld Digital Multimeter
- Số cổ phiếu RS:
- 1233243
- Nhãn hiệu:
- RS PRO

Pháp luật và Tuân thủ
Giấy chứng nhận tuân thủ RoHS
Chỉ thị của EU 2011/65 / EU và 2015/863 hạn chế sử dụng 10 chất dưới đây trong sản xuất các loại thiết bị điện được chỉ định.
Mặc dù hạn chế này không áp dụng một cách hợp pháp đối với các thành phần, nhưng người ta nhận ra rằng việc tuân thủ thành phần của LINE có liên quan đến nhiều khách hàng.
Định nghĩa RS về Tuân thủ RoHS:
- Sản phẩm không chứa bất kỳ chất bị hạn chế nào ở nồng độ và ứng dụng bị cấm theo Chỉ thị,
- và đối với các thành phần, sản phẩm có khả năng hoạt động ở nhiệt độ cao hơn theo yêu cầu hàn không chì chì
Các chất bị hạn chế và nồng độ tối đa được phép trong vật liệu đồng nhất là, theo trọng lượng:
| Vật chất | Sự tập trung |
| Chì | 0.1% |
| thủy ngân | 0.1% |
| PBB (Biphenyls đa bội) | 0.1% |
| PBDE (Ethen Diphenyl đa bội) | 0.1% |
| Crom hóa trị sáu | 0.1% |
| Cadmium | 0.01% |
| DEHP (Bis (2-Ethylhexl) phthalate) | 0.1% |
| BBP (Benzyl butyl phthalate) | 0.1% |
| DBP (Dibutyl phthalate) | 0.1% |
| DIBP (Diisobutyl phthalate) | 0.1% |
Nhà cung cấp mặt hàng được liệt kê dưới đây đã thông báo cho các Thành phần RS rằng sản phẩm là "Tuân thủ RoHS".
Các thành phần RS đã thực hiện tất cả các bước hợp lý để xác nhận tuyên bố này. Thông tin chỉ liên quan đến các sản phẩm được bán vào hoặc sau ngày chứng nhận này.
| Số cổ phiếu RS | 1233243 |
| Mô tả Sản phẩm | RS PRO IDM73 Handheld Digital Multimeter |
| Nhà sản xuất / Thương hiệu | RS PRO |
RS Linh kiện Ltd, Đường Birchington, Corby, Northants, NN17 9RS, Vương quốc Anh
Tuyên bố sự phù hợp
Tuyên bố này xác nhận rằng sản phẩm chi tiết dưới đây tuân thủ các thông số kỹ thuật hiện được công bố trên phương tiện RS và phải tuân theo các điều kiện chất lượng nghiêm ngặt được áp đặt bởi các hệ thống quản lý nội bộ của RS Components. Hơn nữa và khi áp dụng, nó xác nhận rằng tất cả các thiết bị bán dẫn có liên quan đã được xử lý và đóng gói trong các điều kiện đáp ứng các yêu cầu hành chính và kỹ thuật của các tiêu chuẩn kiểm soát tĩnh điện ANSI / ESD S20.20 và EN61340-5-1.
| Số cổ phiếu RS | 1233243 |
| Mô tả Sản phẩm | RS PRO IDM73 Handheld Digital Multimeter |
| Nhà sản xuất / Thương hiệu | RS PRO |
Các thông tin nêu trên liên quan đến sản phẩm được bán vào hoặc sau ngày hiển thị bên dưới.
THÀNH PHẦN RS
| Ngày | Jun 17, 2026 |
Thành phần RS Pte Ltd Robinson Road, PO Box 1582, Singapore 903132
Nước xuất xứ: TW
Thông tin chi tiết sản phẩm
RS PRO IDM73 Digital Multimeter
The RS PRO IDM73 is a compact, rugged and high performing digital multimeter. These handheld devices can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.
The highest measuring category allows measurements direct at the source of the low voltage installation. Features optical interface for transmitting measuring results to PCs.
RS PRO have a great range of meters that are RS approved meaning that they are great value for money and high quality you can rely on.
Features and Benefits
Handy and compact housing
Large-scale display
6000 display count
DCA μA
Data Hold
Min / Max function
Frequency Counter
Capacitance Measurement
Auto Power Off
Shock resistant (1 m drop)
Protective Holster with a tilt stand and lead storage
Large-scale display
True RMS reading on AC mode
DCA μA, A
ACA A (True RMS)
Optional RS-232 interface and software
What does it measure?
DC and AC Voltages - up to 1000 V dc and 750 V ac
DC and AC Current - up to 10 Amps
Resistance and continuity checking - up to 200 MΩ
Diode - open circuit voltage up to 3 V
Capacitance - range from 6 nF to 6 mF
Extra Protection
The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.
Slim Design
Ergonomically designed slim shape with one-handed operating knob and buttons. It just fits into the palm of your hand.
RS-232 Optical Interface
The IDM73 has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.
Batteries
Batteries can be easily replaced by unscrewing only two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.
Display
The LED display turns ON/OFF at the touch of a button, and automatically turns off to save battery life.
What does it include?
Pair of Test Leads
Battery (Installed)
Protective Holster
User Manual
Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
Thông số kỹ thuật
| Thuộc tính | Giá trị |
| Nhãn hiệu | RS PRO |
| Best DC Voltage Accuracy | ±0.5% + 2 Digits |
| DC Voltage Measurement Resolution | 0.1 mV dc |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Resistance |
| Absolute Maximum Resistance Measurement | 60 MΩ |
| Multimeter Type | Handheld |
| True RMS | Yes |
| Best AC Voltage Accuracy | ±0.9% + 5 Digits |
| Best Capacitance Measurement Accuracy | ±1.9% + 8 Digits |
| Minimum Operating Temperature | 0 °C |
| Capacitance Measurement Resolution | 1 pF |
| Height | 164 mm |
| DC Current Measurement Resolution | 0.1 µA dc |
| Resistance Measurement Resolution | 100 mΩ |
| AC Voltage Measurement Resolution | 0.1 mV ac |
| Model Number p | IDM73 |
| Battery Life | 300 h |
| Weight | 400 g |
| Safety Category Level | CAT III, CAT IV |
| Absolute Maximum DC Current Measurement | 10 A dc |
| Best DC Current Accuracy | ±1% + 2 Digits |
| Absolute Maximum AC Current Measurement | 10 A ac |
| Safety Category Voltage | 600 V, 1000 V |
| Battery Type | 9V, IEC 6F22, NEDA 1604 |
| Absolute Maximum AC Voltage Measurement | 750 V ac |
| Best Resistance Measurement Accuracy | ±0.7% + 2 Digits |
| Absolute Maximum DC Voltage Measurement | 1000 V dc |
| Display Type | Digital |
| Maximum Operating Temperature | +50 °C |
| Best AC Current Accuracy | ±1.5% + 5 Digits |
| Width | 44 mm |
| Length | 82 mm |
| Absolute Maximum Capacitance Measurement | 6 mF |
| AC Current Measurement Resolution | 0.1 µA ac |
| Maximum Frequency | 60 MHz |
| Dimensions | 82 x 44 x 164 mm |